Maxx Model CNC hop-up Chamber MGW for MTW

CNC Aluminium Hop-up Chamber MGW unit is precisely machined to perform accurately and consistently on HPA MTW Milspec, Forged, Billet and MTW-9 series. The Hop-up Chamber MGW unit is built with an aluminium Rotary Dial Knob for fine hop-up adjustments, the precision Hop-up Lever and Bucking Nubs to perform best and keep the BB shooting accurately and consistently on every single shot. The Hopup Chamber MGW unit is designed to accept the HPA MTW Engine M4 nozzle length. The Hop-up Chamber MGW unit is wisely equipped with an interchangeable Inlet Adaptor to ensure the hop-up unit is inserted exactly in the center of the inner bore HPA Engine nozzle outlet without wobbling. Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting.

Maxx Model CNC Hop-up Chamber MGW is compatible with :

• Wolverine HPA MTW Milspec, Forged, Billet and MTW-9 series
• Works with Maple Leaf Wonder & Super GBB hop-up rubber.
• Other GBB rubbers are compatible but this requires cutting the centering flat with a cutter.

Please note that this chamber is not compatible with standard AEG rubber, you will need both GBB rubber and GBB inner barrel to make it work on your MTW.

Included:

• 1 x CNC Aluminium Hop-up Chamber MGW
• 2 x CNC Acrylic Side Cover
• 2 x CNC Brass 2.6mm Side Wing
• 1 x CNC Steel Pivot Pin
• 1 x CNC Aluminium Hop-up Lever
• 1 x CNC Aluminium Soft Round Nub
• 1 x CNC Aluminium Soft Flat Nub
• 1 x CNC Aluminium Hard Concave Nub
• 3 x Steel Nub Spring
• 1 x CNC Steel Spring Guide
• 1 x Steel Upper Compression Spring
• 1 x Steel Center Compression Spring
• 1 x CNC Delrin Locking C-Clip
• 1 x CNC Brass Barrel Spacer
• 1 x Brass Barrel Spacer Holder O-ring
• 1 x CNC Aluminium Rotary Dial Knob
• 1 x CNC Aluminium Inlet Adaptor
• 1 x Shim set
• 1 x O-ring set