METEOR is a programmable FCU designed specifically for HPA engines, supporting single-valve and double-valve engines, integrating power connector for gel ball magazines, and power connector for tracer Hop-ups. METEOR can simultaneously save the configuration parameters of three different engines, and can freely switch between the three sets of configuration parameters. It supports voltage input of 6~12.6V, making the power more abundant.

Functions:

1. METEOR supports 3 sets of FCU configurations, FCU1, FCU2, and FCU3. You can choose which FCU configuration to run in the CHOOSE FCU option.

2. Supports open bolt and closed bolt. When using a double-valve engine, open or closed bolts can be selected through CB mode.

3. Auto-loading function is designed for gel ball blaster magazines with a motor inside, when changing the magazine, the magazine motor will run automatically for a few seconds.

4. Paintball mode. When the trigger frequency is low, the engine will fire a single shot; when the trigger frequency is high, the engine will continue to fire continuously.

5. Sniper mode. After activating sniper mode, both semi-auto and full-auto modes execute single-shot shooting, and can only fire once within the set period. When sniper mode is activated, paintball mode is no longer effective.

6. Low battery protection, the system automatically sets the protection voltage based on the battery type. If the system detects that the battery voltage is lower than the protection voltage, it will automatically shut down.

7. Auto shutdown. If the device is not operated within the set time, such as pulling the trigger, loading the magazine, or pressing the settings button, the system will automatically shut down and enter sleep mode.

8. Friction control. This parameter is used to compensate for power after the engine is left idle for some time.

9. BB limit. This function is a virtual number of BB/gel ball setting, where VALUE is the limit of BB/gel ball number. When the number of shots reaches the limit, the system will wait for 2 seconds and cannot fire during this waiting period.

Features:

Size: 60*23*10mm
JST connector for battery, JST ZH 5Pin for trigger board
Supports input voltage of 6~12.6V
Supports single-valve or double-valve engines
Integrated magazine power supply interface and auto pre-loading function for gel ball blasters
Simultaneously save 3 sets of different engine configuration parameters
Compatible with Polarstar V2/V3, Blackleaf Speed GEN2 trigger boards

Package Content:

FCU METEOR x1
Manual x1
Badge x1
JST ZH1.5-5P*20cm x1
JST ZH1.5-3P*20cm x1

Shooting Modes:

SAFE: This model is completely the same as the original safe model. The trigger is stopped by the safety lever.

SEMI: This model can be programmed to implement semi-auto, binary trigger, 3 rounds burst to 9 rounds burst, the default model is semi-auto.

AUTO: This model can be programmed to implement full-auto, 3 rounds burst to 9 rounds burst, the default model is full-auto.

Note:

This product requires soldering and wiring. It is recommended that an experienced technician undertakes installation.

Welcome to our store. Don't forget you can buy now and pay later with KLARNA and PAYPAL pay in 3

Redline Parts