Jefftron AEP Mosfet

• Professionally made mosfet designed for airsoft electric pistols (AEP).
• Device increases gun rate of fire and battery holds longer, than with basic wiring.

Can be installed without modifications into these AEP:

• Cyma CM.030 Glock 18C
• Cyma CM.121 Desert Eagle
• Cyma CM.122 SIG P226
• Cyma CM.123 Colt M1911
• Cyma CM.125 H&K USP
• Cyma CM.126 Beretta M92F
• Cyma CM.127 Phantom
• Cyma CM.128 HI-CAPA 5.1
• Tokyo Marui Glock 18C AEP
• Tokyo Marui Beretta M93R AEP
• Tokyo Marui Beretta M9A1 AEP
• Tokyo Marui HK USP AEP
• Umarex HK USP AEP
• Double Eagle M81 USP

Recommended Battery: Lipol 7.4v (2S)

Specifications:

• Very small device dimension – used Micro mosfet II
• Prepared wiring allows fast and easy installation into the pistol. Simply solder wires to the motor and trigger contacts
• On the devices are pre-soldered high quality power wires 0,5 qmm (AWG20) with silicone insulation (length 210mm from mosfet) and blue wires 0.25 qmm (AWG24) with PVC insulation (length 110mm from mosfet)
• Connector for battery is used JST-SYR 2 pin
• Board covered by conformal coating, it protect device against water
• If you want to use your own wires or connector, choose Micro mosfet II without wiring
• Can be used with any AEP upgrade, because it was designed for spring up to M160 (equivalent for current 75A single shot fire or 25A burst fire for max. 30s)
• Recomended to use 7,4V lipol battery, but device is specified for common batteries up to 17V (Ni-xx 8.4 – 12V, lipol 7.4 – 14.8V)
• 6 wires connection
• Device size 15x7x5mm
• No current consumption in the idle mode
• No sparking on switch contacts
• In auto fire mode piston stops in random position due the mechabox design
• For right function is necessary to have a functional gearbox cut off lever, selector plate, reverse latch, trigger and trigger block, as it has the standard gearbox

Device Instructions: you can download installation manual in English here [PDF, 814.61 kB]

Included:

• Device with wiring and JST-SYR connector
• Installation manual in English

WARNING: Installation of this device leaves to expert, who could solder and disassemble airsoft pistol. Never user soldering gun!