Gate PicoAAB

Many modern AEGs tend to be supplied with a MOSFET as standard, but if you're looking to bring your ageing AEG into the 21st century then this could be the answer. The PicoAAB from Gate Electronics measures only just over 3 cm in length, meaning you can squeeze it into most AEGs without issue. The unit uses the 3rd generation of Gate's MOSFET technology, bringing you some advanced features found only on more expensive alternatives. Features such as Active Brake, which ensures the motor stops turning after each revolution of the gears (in Semi Auto). This prevents the gears over-spinning and ensures the spring will stop in an uncompressed state. The PicoAAB can also handle battery voltages up to 14.8V, with built in thermal protection to keep both the MOSFET and your precious AEG protected.

Features:

• 3rd Generation MOSFET
• Trigger Protecting MOSFET
• Smaller and more compact than over units on the market
• 14.8V LiPo Ready
• Active braking
• Increases the RoF of your AEG
• Provides a better Trigger Response
• Debouncing to prevent contact bounce
• Increase the service life of batteries
• Protects Jammed Rifles from further damage
• Protected from Overheating, Overloading and Short-Circuiting

Package Includes:

• PicoAAB
• User Guide
• Single signal wire for trigger contacts
• Double signal wire for trigger contacts
• Male terminal [2.8 x 0.8mm] with red heat shrink tube (for battery positive wire)
• Male terminal [2.8 x 0.5mm] with black heat shrink tube (for motor negative wire)
• Male terminal [2.8 x 0.5mm] with red heat shrink tube (for motor positive wire)
• Female terminal [2.8 x 0.5mm] with black thin heat shrink tube (for battery negative wire)