Maxx Model CNC Aluminium Hop-up Chamber M4GI for ICS M4

CNC Aluminium Hop-up Chamber M4GI unit is precisely machined to perform accurately and consistently on ICS CXP/CS4/EBB (include old models) M4/M16 AEG series. The Hop-up Chamber M4GI unit is built with an aluminium Rotary Dial Knob for fine hop-up adjustments, precision Hop-up Lever and bucking Nubs to perform BB shooting accurately and consistently on every single shot. The Hop-up Chamber M4GI unit is wisely equipped with an interchangeable Inlet Adaptor to ensure the hop-up unit is inserted exactly in the center of the inner bore ICS AEG Gearbox nozzle outlet without wobbling. Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting. More than that, the Hopup Chamber M4EI unit is specially designed with a new BB Latching System to prevent BB dropping after removing the magazine. The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber.

Maxx Model CNC Hop-up Chamber M4GI is compatible with :

• ICS M4 replica CXP/CS4/EBB
• Maple Leaf Wonder & Super GBB hop-up rubber.
• Other GBB rubbers are compatible but this requires cutting the centering flat with a cutter.

Please note that this chamber is not compatible with standard AEG rubber, you will need both GBB rubber and GBB inner barrel to make it work on your ICS M4 AEG

Included:

• 1 x CNC Aluminium Hop-up Chamber M4GI
• 2 x CNC Acrylic Side Cover
• 2 x CNC Brass 2.5mm Side Wing
• 1 x CNC Steel Pivot Pin
• 1 x CNC Aluminium Hop-up Lever
• 1 x CNC Aluminium Soft Round Nub
• 1 x CNC Aluminium Soft Flat Nub
• 1 x CNC Aluminium Hard Concave Nub
• 3 x Steel Nub Spring
• 1 x CNC Steel Spring Guide
• 1 x Steel Upper Compression Spring
• 1 x Steel Center Compression Spring
• 1 x CNC Delrin Locking C-Clip
• 1 x CNC Brass Barrel Spacer
• 1 x Brass Barrel Spacer Holder O-ring
• 1 x CNC Aluminium Rotary Dial Knob
• 1 x CNC Aluminium Inlet Adaptor
• 1 x Shim set
• 1 x O-ring set